Printing multi-hardness parts with SLS – Presented by Maxime Legrand, Sirris

sirris

Maxime Legrand, Sirris, will speak at 3D Printing Materials Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

New materials are emerging in SLS 3D printing. How to make the best of it? In this presentation, we will consider TPU printing with SLS and how it is possible to change its mechanical properties through parameters optimization and lattice structures.

Continue reading “Printing multi-hardness parts with SLS – Presented by Maxime Legrand, Sirris”

Large scale continuous fibre additive manufacturing for buildings and transportation sectors – Presented by Lucas Janssen, CEAD

Lucas Janssen

Lucas Janssen, CEAD, will speak at 3D Printing Materials Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

CEAD is a technology supplier on the frontier of composite additive manufacturing. The Continuous Fibre Additive Manufacturing, or CFAM in short, is unique and enables the rapid production of large composite parts such as moulds, facade cladding elements and exterior panels for trains and boats.

Interview

What drives you?

Continue reading “Large scale continuous fibre additive manufacturing for buildings and transportation sectors – Presented by Lucas Janssen, CEAD”

The ‘eco system’ approach from materials – printer – to post processing (part one) – Nirali Surati, DSM

dsm

Nirali Surati, DSM, will speak at 3D Printing Materials Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

This is a two-part presentation in partnership with AMT.

The ‘eco system’ approach from materials – printer – to post processing (part one) presented by DSM
The ‘eco system’ approach from materials – printer – to post processing (part two) presented by AMT

The Additive Manufacturing landscape today consists of several moving parts such as materials, machines, software, post processing technologies etc. that all need to work in harmony to ensure a positive experience for users. Varied stakeholders in the industry cater to each of these moving parts forming the ecosystem of additive manufacturing. These seemingly disconnected steps have a broad influence on the additive manufacturing experience and hence its wider adoption. The presentations talk about how DSM and AMT are working on these challenges with a combined eco-system approach.

Continue reading “The ‘eco system’ approach from materials – printer – to post processing (part one) – Nirali Surati, DSM”

Embedding Unique Functionalities in composites by continuous fiber printing – Presented by Andrea Gasperini, Brightlands Materials Center

Andrea Gasperini

Andrea Gasperini, Brightlands Materials Center, will hold his talk at 3D Printing Materials Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

The presentation will provide initially an overview over the range of possible sensors (pressure, elongation, flexural) that have been embedded in composites by exploiting the freedom in fiber positioning by FDM. The response of continuous carbon fibers as a function of flexural load will be presented in a more comprehensive fashion.

Continue reading “Embedding Unique Functionalities in composites by continuous fiber printing – Presented by Andrea Gasperini, Brightlands Materials Center”

Experience from HIP and Heat treatment of Printed Inconnel 718 and Ti6Al4 – Presented by Mats Sjöstedt, Quintus Technologies AB

Mats Sjöstedt

Experience from HIP and Heat treatment of Printed Inconnel 718 and Ti6Al4 – Presented by Mats Sjöstedt, Quintus Technologies AB, at 3D Printing Materials Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

Parts that are printed and have a critical application are always requested to be treated in a Hot Isostatic Press (HIP) to remove defects to achieve a robust and stable production quality. Many printed alloys are also requested to be Heat-Treated to receive a desired microstructure for best static properties.

Quintus Technologies AB have conducted several studies were the HIP and HT has been combined in one HIP-furnace to reduce cost, lead time and improve control of the treatment. In this Presentation we will share some of the experience received from studies conducted on Inconel 718 and Ti6Al4 . Continue reading “Experience from HIP and Heat treatment of Printed Inconnel 718 and Ti6Al4 – Presented by Mats Sjöstedt, Quintus Technologies AB”

Stereolithography 3D Printing with biobased resins – Presented by Geraldine Schnelting, Green PAC

Geraldine Schnelting

Stereolithography 3D Printing with biobased resins – Presented by Geraldine Schnelting, Green PAC, at 3D Printing Materials Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

The accessibility of cost-competitive renewable materials and their application in additive manufacturing is essential for an efficient biobased economy. Current photopolymer resins on the commercial market for stereolithografie 3D printing are fossil-based and expensive, while the availability of low-cost renewable resins is needed to facilitate waste-free and local manufacturing of sustainable 3D products.

Recently, photopolymer resins based on renewable (meth)acrylates were developed and successfully applied in stereolithography 3D printing. Continue reading “Stereolithography 3D Printing with biobased resins – Presented by Geraldine Schnelting, Green PAC”

3D Printing with new materials like silicones, epoxy resins and polyurethanes – Presented by Simon Kasböck, ViscoTec

Simon Kasböck

3D Printing with new materials like silicones, epoxy resins and polyurethanes – Presented by Simon Kasböck, ViscoTec Pumpen- u. Dosiertechnik GmbH, at the 3D Printing Materials Conference, on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

While the additive manufacturing of metals and thermoplastics has already found its way into industrial applications, the 3D printing of fluids and pastes is still at the beginning of being used professionally. With this technology many new materials are available for the additive manufacturing process. These materials are for example silicones, epoxy resins and polyurethanes. Due to crosslinking of material between the layers at a molecular level, the mechanical properties in Z-direction are almost exactly the same as in the x-y plane. Continue reading “3D Printing with new materials like silicones, epoxy resins and polyurethanes – Presented by Simon Kasböck, ViscoTec”

3D Printing Materials Conference welcomes American Elements as Start-Up Partner

American Elements: advanced 3D printing & additive manufacturing materials for aerospace, automotive, biomedical, defense, electronics, & research applications

3D Printing Materials Conference welcomes American Elements as Start-Up Partner

About  American Elements
We specialize in manufacturing exotic and custom alloys and pure rare metal powders with quality characteristics important to 3D printing applications including high sphericity, excellent flowability, and narrow particle distributions. Continue reading “3D Printing Materials Conference welcomes American Elements as Start-Up Partner”

Technologische Ontwikkeling Is Media Partner of 3D Printing Materials Conference

Technologische Ontwikkeling

Technologische Ontwikkeling Is Media Partner of 3D Printing Materials Conference, which will take place on April 16, 2019, at Brightlands Chemelot Campus, Sittard-Geleen, The Netherlands.

About Technologische Ontwikkeling
Technologische Ontwikkeling is the corresponding website for all technologically related publications of MediaPlanet.

Mediaplanet creates useful content that educates our audience and positions our clients as solution providers Continue reading “Technologische Ontwikkeling Is Media Partner of 3D Printing Materials Conference”